| 層壓板厚度公差 *
Laminated Sheet Nominal Thickness and Tolerance* |
| 公稱厚度(㎜)
Nominal Thickness(mm) |
允 許 偏 差 Tolerance |
|
| 酚醛紙層壓板**
Phenolic Paper
Laminated Sheet** |
酚醛棉布層壓板**
Phenolic Cotton Cloth
Laminated Sheet** |
玻璃布層壓板
Glass Cloth
Laminated Sheet |
| 0.4 |
±0.07 |
— |
±0.10 |
| 0.5 |
±0.08 |
— |
±0.12 |
| 0.6 |
±0.09 |
— |
±0.13 |
| 0.8 |
±0.10 |
±0.19 |
±0.16 |
| 1.0 |
±0.12 |
±0.20 |
±0.18 |
| 1.2 |
±0.14 |
±0.22 |
±0.20 |
| 1.6 |
±0.16 |
±0.24 |
±0.24 |
| 2.0 |
±0.19 |
±0.26 |
±0.28 |
| 2.5 |
±0.22 |
±0.29 |
±0.33 |
| 3.0 |
±0.25 |
±0.31 |
±0.37 |
| 4.0 |
±0.30 |
±0.36 |
±0.45 |
| 5.0 |
±0.34 |
±0.42 |
±0.52 |
| 6.0 |
±0.37 |
±0.46 |
±0.60 |
| 8.0 |
±0.47 |
±0.55 |
±0.72 |
| 10.0 |
±0.55 |
±0.63 |
±0.82 |
| 12.0 |
±0.62 |
±0.70 |
±0.94 |
| 14.0 |
±0.69 |
±0.78 |
±1.02 |
| 16.0 |
±0.75 |
±0.85 |
±1.12 |
| 20.0 |
±0.86 |
±0.95 |
±1.30 |
| 25.0 |
±1.00 |
±1.10 |
±1.50 |
| 30.0 |
±1.15 |
±1.22 |
±1.70 |
| 35.0 |
±1.25 |
±1.34 |
±1.95 |
| 40.0 |
±1.35 |
±1.45 |
±2.10 |
| 45.0 |
±1.45 |
±1.55 |
±2.30 |
| 50.0 |
±1.55 |
±1.65 |
±2.45 |
| 註釋/Remarks:
* 對於標稱厚度不在所列的優選厚度之一者, 其允許偏差應採用下一個較大的優選厚度的偏差。
For a sheet of nominal thickness not listed in the table, the permissible variations shall be the same as the next greater thickness. |
| ** 3021B, 3021C, 3025B, 和3025C的公差不參照此表，3025D最小厚度為1.2mm。
The tolerance of 3025B, 3025C, 3021B and 3021C are not listed in this sheet. |
| 特殊需要由供需雙方協商 / Special requirement on specifications could be negotiated by buyer and seller case by case. |
| 標稱面積及其公差 / Nominal area and tolerance ：
980±15mm×1980±25mm; 1020±15mm×2040±25mm; 1220±15mm×2470±25mm; 1020±15mm×1220±25mm
包裝：堅固的木託盤或木箱, 內有防水薄膜
Packing: In solid wooden pallets or cases with protective film inside |
